lav shield lavshield Lav Shield LavShield  truebro Truebro handi Handi lav shield lavshield Lav Shield LavShield  truebro Truebro handi Handi lav shield lavshield Lav Shield LavShield  truebro Truebro handi Handi


(enlarge to 20k)
The new LAV-SHIELDTM lavatory enclosure represents the "Next Generation" of ADA piping protection systems. An alternative to insulation covers around each pipe and component, the designer-style, single-piece LAV-SHIELDTM conceals all lavatory piping, electronic faucet connections, mixing valves, trap primers, and instantaneous hot water heaters* at once. The LAV-SHIELDTM provides the proper knee and toe clearances mandated by the ADA for wheelchair users, prevents pipe component tampering, and offers the aesthetics demanded by the most discriminating of designers.

  Home | Features | Specifications | Suggested Specification
Cutaway View | Submittal Sheet | Sales Info | Contact Truebro | Company Info 

* Lavatory "rough in" should be considered to allow mounting room for water heater behind enclosure. Contact Truebro for specifications.


Features and Benefits

{o} ADA-conforming design protects wheelchair users from scalding and sharp surfaces.
There are no exposed lavatory plumbing and mechanical components.

{o} Sleek, attractive profile is aesthetically refreshing.
The LAV-SHIELDTM tastefully conceals all unsightly plumbing from view…and eliminates the need for piping insulation.

{o} One-size-fits-all configuration is easy to stock and install.
The LAV-SHIELDTM may be used in virtually any new construction or retrofit 20" x 18" ADA-conforming wall hung lavatory application---from residential to commercial, institutional, and industrial. No assembly required; installation takes minutes using the fasteners supplied.

{o} Single-piece configuration is easy to service.
The LAV-SHIELDTM may be quickly removed for convenient, unhindered access to all plumbing and mechanical components. Re-installation takes minutes.

{o} High-impact, UV-protected vinyl maximizes product life cycle.
The LAV-SHIELDTM is molded from impact-resistant, stain-resistant, and chemical-resistant .093" Boltaron 4333 Rigiwall ETM protective vinyl for durability, safety, and long life.

{o} "Total enclosure" design protects lavatory components from tampering.
All piping, electronic faucet connections, mixing valves, trap primers, and instantaneous hot water heaters are completely concealed within this heavy-duty enclosure.

{o} Strict code compliance minimizes risk.
The LAV-SHIELDTM complies with ADA article 4.19.4, California P 1504B, ANSI A117.1, BOCA P 1203.4, and other state and local regulations. The Lav-Shield's Boltaron 4333 protective vinyl is UL tested and listed (ASTM E-84), satisfies NFPA Class A interior finish material safety code 101 and BOCA Class 1 interior finish material code for fire and smoke ratings.


  

Specifications

 MATERIAL  Molded Ridged vinyl
 PROPERTIES  High-impact, stain-resistant
 NOMINAL WALL  1/8 in., 3.17 mm
 DUROMETER   69-Shore A
 FINISH  Fine haircell
 UV PROTECTION   Will not fade or discolor
 DURABILITY   Virtually indestructible
 FASTENERS   7 steel fasteners provided
 COLOR   China white
 COMPATIBILITY  Fits all ADA-conforming 20"x18" wall-hung china lavatories
 PAINTABILITY  Apply acrylic enamel
 FLAMABILITY  UL-94 V-0 Rating
*Tamper resistand stainless steel fasteners available.


Suggested Specification

ADA-conforming, 20"x18" Wheelchair Accessible Lavatories shall be equipped with the molded TRUEBRO, INC. The LAV-SHIELDTM lavatory enclosure Model #2018



  HOME | TOP | LAV  GUARD | BASIN  GUARD

CUTAWAY VIEW | SUBMITTAL SHEET | CONTACT TRUEBRO | COMPANY INFO 


©Copyright 1996 TRUEBRO INC., All Rights Reserved